Skip to content
Guides

P0700 Code: Transmission Control System and How to Fix It

P0700 is a flag code: the transmission module stored its own fault. Scan the transmission module for the real code, then check fluid, connectors and solenoids.

Updated November 19, 2026
Check engine light on a car dashboard with a gearbox icon

P0700 means the transmission control module has stored its own fault and asked the engine computer to turn on the check engine light. The code itself is not the problem. Scan the transmission module for the real code, and use caution if shifting feels wrong.

P0700 at a glance
Code P0700
Meaning Transmission Control System (MIL Request)
Severity Fix promptly
Can I keep driving? Use caution. The transmission may shift harshly or be stuck in one gear. Read the transmission codes to find the real problem.
Most common cause Any transmission fault stored in the transmission module
Difficulty Usually a shop job

What does P0700 mean?

Modern cars have a separate computer for the automatic transmission, the transmission control module (TCM). When the TCM sets a fault that can affect emissions, it asks the engine computer to light the check engine light. The engine computer stores P0700 to record that request.

So P0700 is a flag, not a diagnosis. The TCM holds one or more specific codes, such as P0705 for the range sensor, P0715 for the input speed sensor or P0730 for an incorrect gear ratio. Many cheap scanners only talk to the engine computer, so they show P0700 and nothing else.

P0700 symptoms

  • Check engine light, sometimes with a transmission or gear warning
  • Harsh, delayed or flaring shifts
  • Stuck in one gear, often second or third, known as limp mode
  • No torque converter lockup at highway speed and worse fuel economy
  • Sometimes no symptoms at all

What causes P0700?

  1. Any fault stored in the TCM: this is by far the most common cause, since P0700 always sets because of another code.
  2. Faulty solenoid or sensor: shift solenoids, speed sensors and the range sensor are frequent sources of TCM faults.
  3. Low or dirty transmission fluid: low fluid starves the valve body, and burned fluid carries clutch debris.
  4. Wiring or connector problem: fluid inside the transmission connector or a damaged harness gives false signals.

How to fix P0700

  1. Read the TCM codes: use a scanner that reads the transmission module, not just the engine computer. The best OBD2 scanners for beginners list includes models that do. Write down every code and the freeze frame data.
  2. Look up the TCM code: it is the real fault. Diagnose that code, not P0700.
  3. Check the fluid: if the transmission has a dipstick, check level and smell with the engine at operating temperature. Many newer cars have no dipstick and need a shop to check the level.
  4. Inspect the connector and harness: look for fluid, corrosion or chafed wires at the transmission connector.
  5. Clear and retest only after you note the codes: P0700 returns until the underlying fault is repaired. Clearing does not repair it and erases information a shop needs. How to use an OBD2 scanner covers saving freeze frame data first.

Can you drive with a P0700 code?

You can for a short distance if the transmission shifts normally, but get the TCM codes read soon. The transmission may shift harshly or stick in one gear without warning.

Stop driving if it slips, will not leave first gear, bangs into gear or drops into limp mode on a highway. Low fluid or a failing clutch pack can wear fast. Burned fluid or metal in the pan means a shop visit.

  • P0705: Transmission Range Sensor A Circuit (PRNDL Input)
  • P0715: Input/Turbine Shaft Speed Sensor A Circuit
  • P0730: Incorrect Gear Ratio

FAQ

Why does my scanner only show P0700?

Many basic scanners read the engine computer only, and P0700 lives there. The real codes are in the TCM. A scanner that supports transmission or enhanced diagnostics can read them.

Can low transmission fluid cause P0700?

Yes, indirectly. Low or burned fluid makes the transmission slip or shift poorly, and the TCM stores a specific code that triggers P0700. Correct the fluid, then rescan for stored codes.

Will P0700 clear itself?

Only if the stored TCM fault stops occurring over several drive cycles. A solenoid, sensor or wiring fault usually returns, and so does P0700.

Is P0700 expensive to fix?

The cost is whatever the TCM code points to. A connector repair or fluid service is cheap. A solenoid pack is moderate, and an internal clutch repair or rebuild is expensive.

Got more than one code? Enter them all in the OBD2 code lookup to see each meaning, severity and first check side by side. If you still need a reader, start with the best OBD2 scanners for beginners, then follow how to use an OBD2 scanner to pull freeze frame data before you clear anything.

Sources & References

  1. SAE J2012, diagnostic trouble code definitions: https://www.sae.org/standards/content/j2012_201612/
  2. California Air Resources Board, on-board diagnostics: https://ww2.arb.ca.gov/our-work/programs/obd-board-diagnostic-program
  3. EPA, vehicle emissions inspection and maintenance: https://www.epa.gov/state-and-local-transportation/vehicle-emissions-inspection-and-maintenance-im
Avatar photo
About the Author

James Kowalski

Automotive Writer

James Kowalski is a former ASE-certified mechanic turned automotive writer. With 10 years of hands-on experience in repair shops and dealerships, James specializes in practical topics like tires, brakes, performance upgrades, and truck accessories. He believes in empowering readers with the knowledge to make informed decisions about their vehicles, whether they're weekend warriors or daily commuters.

More from James Kowalski

How we reviewed this article

This article was researched against manufacturer records and editorially reviewed before publishing. We accept no payment for coverage. Some guides contain affiliate links; see our affiliate disclosure.